Beautiful Work Replace Kitchen Sink Drain Pipe

Remove the Old Drain Pipe Remove the old drain assembly from the top down.

Replace kitchen sink drain pipe. Replace Kitchen Sink Pipes Step One Take the Old Drain Apart Disassemble the existing drain assembly so you can remove the strainer which most likely is the leaky culprit. Before you buy a new kitchen sink it is a good idea to check the height of the trap arm on the old sink. Attach the outlet of the P-trap to the waste drain with the pipe you prepared for that section.

Fit the straight tail pipe into the sinks drain and attach it with the slip nut. They usually charge a one-hour minimum even if the project runs shorter. The rate to hire a plumber is 45 to 200 per hour.

Repairing or replacing drain lines in the kitchen can be as low as 100. If your kitchen sink drain is corroded and leaking installing a new basket strainer is an easy way to solve the problem. Around the smaller sized threads of the sink drain pipe wrap plumbers or Teflon tape a couple of times.

Tighten the compression nut by hand so that youre unable to slide the pipe along the tailpiece. Remember the drain trap the U-shaped bend will have a small amount of standing water so have your bucket or bag handy. Prepare the New Drains before you proceed with the rest of the steps on how to replace pipes under kitchen sink.

Start by adding plumbers putty to the underside of the basket strainer and fit it into the drain hole at the bottom of the sink. 3 Main Problems Explained. I had 3 major problems that I.

Thread the tail pipe in until secure but do not completely tighten. Connect the drain inlet to the sink tailpieces using the compression nut. Dry-fit the piping assembly by attaching it to the sink drain.